Close Menu

GCATPA B Class Rules

1958 AND UNDER

1. SPEED LIMIT IS 5.5 MPH. IF MAX SPEED IS OVER 5.5 AT END OF PULL YOU ARE DISQUALIFIED.
2. RPMS MUST BE WITHIN 20% OF MANUFACTURER RECOMMENDED HIGH IDLE.
3. CUT TIRES ALLOWED.
4. HITCH HEIGHT IS 20" MAXIMUM. CENTER OF AXLE TO POINT OF HOOK, MEASURED HORIZONTALLY, CAN BE NO LESS THAN 18". TRACTORS MUST BE EQUIPPED WITH A PLATE WITH A 3"x3.75" HOLE OR CLEVIS TO PULL FROM DRAWBAR ASSEMBLY, RIGID IN ALL DIRECTIONS, WITH NO HOOK RESTRICTION AT HOOK POINT.
5. REAR WEIGHTS ARE NOT TO EXTEND REARWARD MORE THAN 6" PAST THE FURTHEST PART OF THE REAR TIRE.
6. FRONT WEIGHTS CANNOT EXTEND MORE THAN 11' FROM CENTER OF REAR AXLE.
7. ALL TRACTORS MUST HAVE FUNCTIONAL WHEELIEBARS.
8. ALL TRACTORS MUST HAVE A FUNCTIONAL KILL SWITCH.
9. TRACTORS MUST HAVE STOCK ENGINE BLOCK, HEAD, FRAMING(NO ALUMINUM), TRANSMISSION, REAR END, INTAKE AND EXHAUST MANIFOLDS. CARBURETOR MUST BE STOCK OR MANUFACTURED REPLACEMENT. NO HOMEMADE OR MODIFIED INTAKE OR EXHAUST MANIFOLDS. ALL MANIFOLDS MUST BE FOR THAT MODEL OF TRACTOR. DIMENSIONALLY CORRECT REPLACEMENT BLOCKS WITH SAME NUMBER OF CYLINDERS ARE ACCEPTABLE. HOOD AND GRILL MUST BE IN PLACE AND HAVE STOCK APPEARANCE AS BY THE MANUFACTURER.
10. MAXIMUM TIRE SIZE: 18.4 MAX